C3 Commercial Cleaning
Autonomous commercial cleaning robot that scrubs, sweeps, vacuums and dust mops, and rides lifts between floors.
Price on request
Cleaning and disinfection robots
PadBot D3 Disinfection Robot
Autonomous disinfection robot with ultrasonic atomisation, a 15 L tank and lidar navigation.
Price on request · quoted per configuration
- 15 LWater tank capacity
- 3 L/hPublished atomisation rate
- 10 hPublished operating time
D3
Price on request
What the D3 does
The D3 maps indoor spaces with lidar and disinfects them on its own, using an ultrasonic atomisation head fed by a 15 L tank at a published rate of 3 L per hour. It runs scheduled tasks, avoids obstacles, can ride lifts with an optional elevator control module and returns to its dock to recharge. PadBot publishes a 10 hour operating time and a 9 hour charging time.
At a glance
- Dimensions (L x W x H)
- 500 x 500 x 880 mm
- Net weight
- 32 kg
- Disinfection method
- Ultrasonic atomisation, 360 degree coverage
- Water tank capacity
- 15 L
- Atomisation rate
- 3 L/h
- Disinfection coverage area
- 20,000 m (unit as published)
Where it is used
- Hospitals
- Schools
- Office buildings across several floors
- Hotels
- Shopping centres
- Airports, transport facilities and large venues
Features
- 01
Ultrasonic atomisation
An ultrasonic atomisation head fed by a 15 L tank sprays across the area, with PadBot listing 360 degree disinfection coverage.
- 02
Autonomous navigation
It builds indoor maps with lidar, localises itself on them, senses its surroundings in real time and plans its disinfection paths.
- 03
Obstacle avoidance
An obstacle avoidance system lets it work around people and furniture without stopping the task.
- 04
Scheduled tasks
Disinfection runs at set times and fixed locations, and the robot reports back to the back-end system when each task is done.
- 05
Mask detection
It detects whether people are wearing a mask and plays a voice reminder to wear it properly.
- 06
Remote monitoring
Staff can follow the robot's status and task progress in real time from a remote location.
- 07
Cross-floor work
An optional smart elevator control module lets it call and ride lifts, and PadBot lists support for turnstiles and access control.
- 08
Automatic charging
After each task it returns to its designated charging dock on its own to recharge.
D3 specifications
Body
- Dimensions (L x W x H)
- 500 x 500 x 880 mm
- Net weight
- 32 kg
- Chassis
- Shock-absorbing
Display
- Touchscreen
- High-definition touchscreen
Cleaning
- Disinfection method
- Ultrasonic atomisation, 360 degree coverage
- Water tank capacity
- 15 L
- Atomisation rate
- 3 L/h
- Disinfection coverage area
- 20,000 m (unit as published)
Mobility
- Travel speed
- 0 to 0.7 m/s (0 to 2.5 km/h)
Navigation and sensing
- Navigation
- Lidar, with indoor mapping and localisation
- Obstacle avoidance
- Intelligent obstacle avoidance system
- Mask detection
- Supported, with voice reminder
Connectivity
- Building integration
- Elevator control (optional module), turnstiles and access control
- Remote management
- Real-time status and task monitoring, task reports to back-end system
Computing
- Memory
- 4 GB + 64 GB
Power
- Battery capacity
- 12,800 mAh
- Charging time
- 9 hours
- Operating time
- 10 hours
- Automatic charging
- Supported, returns to its dock
Body
- Dimensions (L x W x H)
- 500 x 500 x 880 mm
- Net weight
- 32 kg
- Chassis
- Shock-absorbing
Cleaning
- Disinfection method
- Ultrasonic atomisation, 360 degree coverage
- Water tank capacity
- 15 L
- Atomisation rate
- 3 L/h
- Disinfection coverage area
- 20,000 m (unit as published)
Connectivity
- Building integration
- Elevator control (optional module), turnstiles and access control
- Remote management
- Real-time status and task monitoring, task reports to back-end system
Computing
- Memory
- 4 GB + 64 GB
Display
- Touchscreen
- High-definition touchscreen
Mobility
- Travel speed
- 0 to 0.7 m/s (0 to 2.5 km/h)
Navigation and sensing
- Navigation
- Lidar, with indoor mapping and localisation
- Obstacle avoidance
- Intelligent obstacle avoidance system
- Mask detection
- Supported, with voice reminder
Power
- Battery capacity
- 12,800 mAh
- Charging time
- 9 hours
- Operating time
- 10 hours
- Automatic charging
- Supported, returns to its dock
Manufacturer-published values (PadBot product page). Your quotation defines the included hardware, analytics, software licences, connectivity and service terms. Appearance and equipment may vary with the final configuration.
Build your D3 quote
Add the D3 to your quote list with the quantity you need. One request covers every robot on the list; we reply with a configuration proposal by email.
- Robot, selected functions and accessories
- Delivery to your site
- What is and is not included, in writing
PadBot D3
D3 Disinfection Robot
Price on request
No obligation. Prices exclude VAT.
Questions about the D3
Is the PadBot D3 available in South Africa?
Yes. EzeBot supplies the PadBot D3 in South Africa on quotation, from George in the Western Cape. Add it to your quote list or ask a specialist about your site.
What does the PadBot D3 cost?
Pricing is on request while local configurations are confirmed. Your quotation lists the robot, the selected options, delivery and the support terms.
Who makes the D3?
Guangdong Padbot Robotics Ltd., a robotics company in Guangzhou, China, founded in 2013. The specifications on this page are published by the manufacturer.
More from the range
All robots
S5 Outdoor Patrol
Autonomous outdoor patrol robot with a 20x starlight camera, 3D LiDAR navigation and two-way voice.
Price on request
S2 Indoor Patrol
Indoor security patrol robot with 4K HD video monitoring, AI detection and scheduled autonomous patrols.
Price on request
Talk to us about the D3
Tell us where the robot will work and what it needs to do. We reply with a proposal covering the robot, its set-up options and what is included.
Or call +27 44 333 0646, George, Western Cape.
